Parts & Accessories

This kit includes drive side and non-drive side adapters for bicycles with 12x142 or 12x148 thru axles. Note: This adapter is compatible with KICKR CORE and KICKR v4(2018) and newer models of KICKR. Note: Kit also includes Shimano style and SRAM XD/XDR style freehub lock nuts that need to be installed.

Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.

Take your KICKR MOVE ride experience to a whole new level. The KICKR CLIMB Base Adapter is required to use the KICKR MOVE in conjunction with a KICKR CLIMB. NOTE: The use of KICKR CLIMB and KICKR MOVE together, require you to use the KICKR CLIMB base adapter to avoid damage to the KICKR CLIMB or other property.

KICKR XDR Freehub body allows you to use your KICKR with the new SRAM AXS drive train system. This kit includes a 1.8mm spacer for XD compatibility. Compatibility: KICKR '18, v5, v6, MOVE and KICKR CORE

The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides. - Impervious to sweat and spilled water bottles. - Gripping texture keeps the KICKR in place, so you can focus on your ride. - Material helps to reduce noise and make the KICKR even quieter. - Beveled edge keeps the mat in line with the floor.

Wahoo's latest accessory for the KICKR Smart Trainer lets you worry less about your connection and focus on your virtual ride at hand. No more wireless drop outs or signal interference—KICKR Direct Connect attaches your KICKR to your router for a constant streaming virtual ride or race. Compatible with many 3rd party apps including The Wahoo SUF Training App, TrainerRoad, Fulgaz, and many more. Note: KICKR Direct Connect is not compatible with previous KICKR editions, KICKR CORE, and KICK SNAP. Don't Get Dropped No more worrying about your wireless connection dropping during your virtual races and online group rides. KICKR Direct Connect provides a hard-wired solution from your KICKR Smart Trainer to your internet router. Safe and Secure To prevent damage to the Direct Connect Pod or your KICKR, Direct Connect has a Quick disconnect cable that is robust enough to stay attached during normal use but will easily break the connection if enough pressure is applied. Zero Configuration Direct Connect is built on Multicast DNS to provide a simple, plug-and-play solution to stay connected. App Compatibility KICKR Direct Connect is compatible with The Wahoo SUF Training App, Trainer Road, Rouvy, Fulgaz, bKool, RGT Cycling, and Veloreality, with more 3rd party partners coming in the future.

The KICKR HEADWIND is the first ever smart fan, designed with the cyclist in mind. Its Targeted Airflow Pattern mirrors the shape and position of a cyclist's body while riding. The KICKR HEADWIND is sensor controlled so as your speed or heart rate increases, so will the fan speed, and there are also 4 manual speed settings should you want to set your own ideal airflow. With speeds of over 30 mph (48 kph), the KICKR HEADWIND will keep you cool during the toughest training sessions. - With wind speeds topping out at over 30 mph the KICKR HEADWIND will keep you cool during your hardest efforts. - The Targeted Airflow Pattern of the KICKR HEADWIND is designed to mirror the shape and position of a cyclist's body while riding on a bicycle. - Control the speed of your KICKR HEADWIND by pairing your ANT+ speed sensor, heart rate monitor, or smart trainer directly to the fan. As your speed or heart rate increases so will the fan speed. - Pair to the Wahoo App via Bluetooth for easy fan speed control at your fingertips. - Control the KICKR HEADWIND with a simple press of a button. Four (4) preprogrammed fan speeds allow you to select your ideal airflow. - The KICKR HEADWIND was specially designed to fit with the KICKR DESK. The wheels on the KICKR HEADWIND allow you to roll the fan into position when it is attached to your KICKR DESK.

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

- Adapter for Tacx Direct Drive trainer - 01 is compatible with 142 x 12mm and 148 x 12mm - 02 is compatible with 135 x 10mm - 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive trainer), 142 x 12mm and 148 x 12mm - 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the thru axle mount on a Tacx NEO or FLUX Smart trainer.

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.

For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)

Connect your PC to CycleOps VirtualTraining.

Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.

TRAINER THRU AXLE ADAPTER FOR SARIS TRAINERS WHAT'S INCLUDED: - Thru axle - Washers - Endcaps with bolts - The 148x12mm adapters also come with a shorter bolt action slider tube. TRAINER COMPATIBILITY The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. BIKE COMPATIBILITY Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. Both 148x12 Thru Axle Adapters are compatible for both 142 and 148mm bikes. 148x12 Thru Axle Adapter, 1.5 Thread Pitch (9733T) works for: - 148 x 12mm - 142 x 12mm - 1.5 thread pitch

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

The Giant Indoor Trainer Mat is the perfect noise-reducing floor protection for indoor training. - Rubberized material for easy rinse off after your workout - ‘Pebbled’ surface, anti-skid and scratch-resistant material protects flooring while working out - Extra-large 3’ x 6’ (91.5cm x 183cm) size covers entire workout area, prevents perspiration from getting on carpets or wood floors - Comes rolled-up in draw-string, mesh carry bag with shoulder strap

This durable, padded travel bag is made to protect and secure your Pro Mechanic HD, Pro Mechanic, or Sport Mechanic repair stand when it's not in use. It features a zip closure, carry handles, and a clear card window for your luggage tag. This travel bag can also accommodate older Feedback repair stands such as the Pro Elite and Classic. Our repair stand travel bags are the best protective accessory for ensuring your stand looks new for years to come. Be the most popular rider at the trailhead with a Feedback Sports repair stand, and keep it looking new with a protective travel bag. Features: - Sized to fit the Pro Mechanic HD repair stand. - Also compatible with Pro Elite, Sport Mechanic and Ultralight repair stands. - Maximize the portability of your Feedback Sports repair stand. - Protect your stand’s aluminum finish and your other equipment when traveling. - Travel bag is water-resistant, durable, and padded. - Enough space for a repair stand, Flop Stop, and Pro Truing Stand. - External window for business cards / ID card. - Padded Velcro™ strap for comfortable carrying and transport. - Full-length, dual-zipper design. - Rugged end-loops for vertical storage when not in use. - 1-Year Warranty.

Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party! - Non-slip surface keep you safe while in cycling cleats - Protects floors from sweat and bike grime - Water-repellent surface does what it was designed to do – keep sweat off your floor - Compress-ability ensures trainer stays put during intense efforts - Easily rolls up for storage - Cleans easily with soap and water - Absorbs noise and vibration - Enhances overall stability of any indoor trainer setup - 4mm (5/32?) thickness is optimal balance of support and storage

You’re already a proud owner of the Omnium Over-Drive Bike Trainer, but today you’re looking for a resistance-free, simple and effective spin session. Designed to be lightweight and portable, the Omnium Zero Resistance Sled is adaptable to whatever bike you ride and whatever workout you’re targeting – let the Zero-Drive Sled be your next training accessory. - Precision machined 4.25” aluminum rollers create a smooth and quiet ride - Dynamic, free-floating rear wheel design promotes the most realistic, road-like riding experience - Adaptable to virtually any bike (up to 1348mm wheelbase with optional extender) - No tools required to assemble or store — simply unfold for use and fold for storage and travel - Maintenance-free resistance unit and roller bearings - 3-Year Warranty

This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly - Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6% - Anti-slip rubber feet eliminate handlebar vibrations - Internal design that guarantees maximum wheel stability - Suitable for both road and MTB - You can attach to the trainer frame when not in use for easy transport and storage

The Elite Folding Mat increases the comfort of your home cycling setup while protecting the surfaces you train on every day. It's easy to use, store, and transport and can be stored everywhere in your house. Dimensions: 1.8m x .9m

Protects the bicycle from sweat and avoids corrosions or rust. - Prevents an accumulation of sweat on the frame and components that would lead to corrosion or affect the finish - Sits above the top-tube and can be adjusted for different bicycles - Washing-machine friendly

Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer. - Reads data based on the type of trainer used. - Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices. - When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.

The Elite Smart Sterzo riser block allows steering up to 34 deg while riding your rear wheel trainer while using ANT and Bluetooth communication protocol, interacts with compatible apps to give you the most realistic indoor ride. It’s rotating pivot features a practical automatic return system for you to easily get the handlebar back to its original position. Compatible with tires up to 56mm wide