Filter By:
Riser
A 35mm mountain bar that maintains a forgiving ride feel and maximizes strength with minimal weight.
Large and in charge
Line 35 is ready for any terrain and changes what's possible on the trail. It maintains comfort and control on any ride, and an oversize clamping diameter increases strength and decreases overall bar and stem weight while ensuring a compliant, forgiving ride. Proven sweep and convenient graphic markings help dial in the perfect setup.
Product details
- Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter
- Quad-butted, tapered wall, 7050-T6 aluminum construction
- Laser-etched brake lever position lines for spot-on control setup
- Unidirectional carbon fiber riser bar with 35mm stem clamp area
- Downhill strength with 25% weight savings compared to aluminum
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes.
- Four rise options available from 30-100mm
- AL-6061 aluminum alloy
- ISO4210 Safety Tested for City/Trekking use
- Not recommended for use with bar-ends or clip-on aero bars
- 15-degree sweep
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards.
- Shot-peened finish
- 6061-T6 Aluminum
- 9-deg backsweep
- 720mm wide
- 35mm rise
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain.
- Material: Carbon Fiber
- Weight: 200g (25mm rise); 190g (7mm rise)
- Bar Width (Max): 780mm
- Bar Width (Min): 740mm
- Clamp Diameter: 31.8mm
- Sweep: 9 Degrees
- Tip: 5 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine.
- Material: Carbon
- Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise)
- Bar Width (Max): 800mm
- Bar Width (Min): 780mm
- Clamp Diameter: 35mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep.
- Material: Carbon
- Weight: 245g (30mm rise); 265g (50mm rise)
- Bar Width (Max): 810mm
- Bar Width (Min): 780mm
- Clamp Diameter: 31.8mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
Budget-friendly mountain bars with stylish flair.
- Plain gauge, tapered and shot-peened AL6061/T6
- Shot-peened for surface hardness
- 15mm rise
- 9° backsweep, 4° upsweep
- Bar Clamp Diameter: 31.8mm
- Material: Alloy
- Width: 740mm
The SL-K Riser Bar is the ultimate mix of light weight and strength for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both worlds of carbon and aluminum. The carbon helps keep the vibration to a minimum, while the aluminum core maintains a majority of the strength. The SL-K handlebar is XC weight-matched with Enduro strength. With a solid 740mm width and 18mm rise, this bar will help with a perfect fit, great control, and peak performance for even the most demanding rider in mind.
- UD carbon and AL6066 material
- Carbon Structural Integration (CSI)
- Textured stem clamp zone
- 18mm rise
- 9° backsweep, 4° upsweep
- UD carbon finish
- Ideal for fitness and comfort cyclists
- A great replacement handlebar
The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar.
- 41-Thermal processed 4130 chromoly
- Multi-butted
The BOSS bar is Aaron Ross’ signature bar that is multi-butted and 41-Thermal processed 4130 chromoly.
- Aaron Ross signature
- Proven 41-Thermal processed 4130 chromoly
- Multi-Butted, traditional 7/8" crossbar for strength
The Super Highway bar is a mid-rise bar that comes with Odyssey's legendary 41-Thermal lifetime warranty.
- 1.8/1.3mm thick, multi-butted main tubing
- Butted, traditional 7/8? crossbar for strength
- Large radius bends for greater durability
- Post-weld heat-treated
A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability.
- Multi-Butted, traditional 7/8" crossbar for strength
- Large radius bends for greater durability
- Welded end caps to reduce flex
- Post-weld heat-treated for added strength
A25Y Alloy Riser Bar
- Cut marks provide a range of width options
- Textured Grit Grip finish in clamp areas eliminates over-tightening of components
A25 Alloy Riser Bar
- Cut marks provide a range of width options
- Textured Grit Grip finish in clamp areas eliminates over-tightening of components
- Features PFL (Plastic Foam Lamination) manufacturing
- PFL utilizes tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars
- The process uses less excess resin and fewer plys, resulting in a 15% lighter bar
Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number.
Features
- Manufactured from cold drawn, seamless 6061 Alloy.
- Butted for an optimal strength to weight ratio.
- Wider construction & re-designed taper offers
- 740mm wide
- 9° rearward, 6° upward
The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar.
- Shot-peened to increase fatigue resistance
- 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance
- Manufactured from cold drawn, seamless aluminum
- Upsweep: 5°
- Backsweep: 8°
A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast.
Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank.
- Shot-peened to increase fatigue resistance
- 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance
- Manufactured from cold drawn, seamless aluminum
- Upsweep: 5°
- Backsweep: 9°
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number.
- Manufactured from cold drawn, seamless 6061 Aluminum
- Shot peened for increased fatigue life
- 35 optimized triple butted design
Race Face Atlas riser handlebar with an anodized, shot-peened finish.
- Aonodized, shot-peened finish
- Cold-drawn and butted proprietary AirAlloy aluminum tubing
- 4 degree upsweep
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it?
- Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform
- Requires 35mm bar clamp diameter stem
- Full 800mm width that can be trimmed down to a minimum 750mm
- 8 degree rearward sweep, 5 degree upward sweep
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you.
- Manufactured from cold drawn, 7075 Aluminium
- 35 optimized triple butted design
- Turned up to Rally control with 800mm width
- Rise sizes to for every build and preference 10/20/35mm
- Stealth black on black decals to match every frame color
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse…
- Manufactured from UD Carbon with matte clearcoat
- Carbon optimized flex for improved small bump compliance
- Gold Standard of DH is now wider and stronger
- 820mm width for maximum control
- Intended use: XC and Trail
- Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform
- Manufactured from UD Carbon with matte clearcoat
- Requires 35mm bar clamp diameter stem
- 8 degree rearward sweep, 5 degree upward sweep
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it.
- Manufactured from UD Carbon with matte clearcoat
- Carbon optimized flex for improved small bump compliance
- 35mm bar diameter for incredible strength/weight ratio
XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.
Page 1 of 3
Next page