Clothing

The Beretta is the ultimate women's GORE-TEX 3 Layer bib that you've been dreaming of! Highly waterproof yet breathable fabric, a flattering fit enhanced with articulation and stacked with features like chest media storage pockets, thigh cargo pockets, two-way side zip YKK® AquaGuard® water resistant zipper access and a low-key drop seat construction. Designed and developed for the woman who demands performance gear that is durable, waterproof and breathable to help regulate body heat on uphill approaches as well as maintain comfort on the ride down, all without sacrificing style. Definitely Dakine ladies' favorite!

This jacket is built for winter's worst weather. Maximum protection against the elements and lasting durability earn the Sawtooth GORE-TEX 3L shell jacket highest marks in performance and functionality. Water-resistant YKK® AguaGuard zippers, wrist gaiters, and a stretch powder skirt work hard to keep wind, rain and snow out, and zippered torso vents help regulate body temperature in milder weather. Ample pockets including a mesh goggle pocket and dedicated media pocket stash necessities easily, so you're always prepared for a full day on the mountain.

A further development of our popular ski glove with heating loops. Suitable for those whose hands get cold easily. The heating control can be set in three steps, depending on the weather and temperature. Heating elements are located at each fingertip, including the thumb. Tight fit for increased dexterity and feeling. Hard-wearing goat leather palm. Important Notice! The electronic components of this glove may interfere with avalanche transceivers. Outer Material: HESTRA Flextron softshell 4-way stretch, Impregnated goat leather - Windproof, water-resistant, and breathable. - 92% Polyamide, 8% Elastane. - Water-resistant goat leather Insert - CZone - Waterproof and breathable membrane. Insulation: Fiberfill - 100% Polyester Lining: Brushed polyester - Durable lining with a soft feeling. The brushed surface binds more air which provides a better insulation. 100% polyester.

A further development of our popular ski glove with heating loops. Suitable for those whose hands get cold easily. The heating control can be set in three steps, depending on the weather and temperature. Heating elements are located at each fingertip, including the thumb. Tight fit for increased dexterity and feeling. Hard-wearing goat leather palm. IMPORTANT NOTICE! The electronic components of this glove may interfere with avalanche transceivers. Outer Material: HESTRA Flextron softshell 4-way stretch, Impregnated goat leather - Windproof, water-resistant and breathable. - 92% Polyamide, 8% Elastane. - Water-resistant goat leather Insert - CZone Insulation: Fiberfill - 100% Polyester Lining: Brushed polyester - Durable lining with a soft feeling. The brushed surface binds more air which provides a better insulation. 100% polyester.

Fully loaded with features and ample pocket space, and rounded out with the best in waterproof breathable performance, the Stoker 3L GORE-TEX bib is a staple for riders looking for additional performance to step beyond the resort and into the backcountry. Built with YKK® AquaGuard water resistant zippers and fully taped seams to keep the snow out, it also features articulated knees and a stretch back panel for easy range of motion. Adjustable suspender straps, zip-adjustable hems, and centerfront entry are practical features that make it easy to get in, get out, and dial in your fit. While the tethered hand pocket clip is great for securing keys, and the Quick Fly hidden zipper means easy backcountry relief.

The new Chinook Jacket was inspired by our Montreal heritage and need to create a unique, urban-inspired piece of outerwear that can blend the line between streetwear and skiwear. The Prime10 textured fabric and Warm SD insulation give the Chinook a completely one-of-a-kind look, while still offering all of the bells and whistles you’d need to enjoy a day in the mountains with friends.

The Resistance Layer Tights are flexible base layer tights that give protection against lacerations. Protective base layer - The Resistance Layer tights work as a protective base layer for skiers and snowboarders. By adding a new type of Dyneema with stretch developed specifically for POC, the base layer incorporates one of the world's strongest fibers to give laceration protection from sharp ski edges. The tights are certified to European cut resistance standard EN388-2016, Level 3 (of 5). Wool for comfort - The base layer uses a wool/polyester blend in a double-knit construction so that the wool sits next to the body for extra comfort. An elastic waistband ensures the base layer sits comfortably and securely in place for a whole day on the mountains. - Base layer tights developed to protect against lacerations from sharp edges on skis. Features a unique Dyneema fabric developed specifically for POC. Dyneema is one of the world's strongest fibers. - Dyneema cut resistant zones cover areas on the legs most at risk from lacerations. - Wool/polyester blend in other areas for warmth and functionality. A double-knit construction allows the wool to sit next to the body to enhance comfort. - An elastic waistband helps ensure the base layer armor sits comfortably and securely in place. Composition - Main fabric: 73% polyester, 20% wool, 7% polyamide - Reinforcement: 95% dyneema polyethylene 5% elastane Weight - 209g

Our heated liner allows you to turn your existing Hestra gloves into electrically heated gloves. Features heated coils embedded on the backhand for cold winter days. The temperature can be adjusted in three steps depending on the weather. May be worn together with these gloves: - 30570 Army Leather Heli Ski 5-finger - 30571 Army Leather Heli Ski Mitt - 30572 Army Leather Heli Ski 3-finger - 30670 Army Leather Patrol Gauntlet - 30660 Army Heli Ski OutDry - 30480 Narvik Wool Terry **IMPORTANT:** Should be worn as a liner with a shell glove for cover and protection of the electric components. The electronic components in this glove may interfere with avalanche transceivers. Outer Material: Stretch polyester - 70% polyester, 30% PU. Ripstop Polyamide fabric - Windproof, water-resistant and breathable. - 100% polyamide. Insulation: Fiberfill - 100% Polyester Lining: Brushed polyester - Durable lining with a soft feeling. The brushed surface binds more air which provides a better insulation. 100% polyester. Details - Integrated heating loops - USB Charger - Watertight zipper - Rechargeable/replaceable batteries

Our heated liner allows you to turn your existing Hestra gloves into electrically heated gloves. Features heated coils embedded on the backhand for cold winter days. The temperature can be adjusted in three steps depending on the weather. May be worn together with these gloves: - 30570 Army Leather Heli Ski 5-finger - 30571 Army Leather Heli Ski Mitt - 30572 Army Leather Heli Ski 3-finger - 30670 Army Leather Patrol Gauntlet - 30660 Army Heli Ski OutDry - 30480 Narvik Wool Terry **IMPORTANT:** Should be worn as a liner with a shell glove for cover and protection of the electric components. The electronic components in this glove may interfere with avalanche transceivers. Outer Material: Stretch polyester - 70% polyester, 30% PU. Ripstop Polyamide fabric - Windproof, water-resistant and breathable. - 100% polyamide. Insulation: Fiberfill - 100% Polyester Lining: Brushed polyester - Durable lining with a soft feeling. The brushed surface binds more air which provides a better insulation. 100% polyester. Details - Integrated heating loops - USB Charger - Watertight zipper - Rechargeable/replaceable batteries

Our most recent glove development for Alpine Racing features extensive protection in the areas of the hand that are the most exposed for impacts. The protection panels comprises two layers for improved protection: d3o material with intelligent molecules combined with harder panels of cell foam plastic. The d3o-material is soft and elastic until it receives an impact or vibration. Knuckles and underside of thumb are reinforced with abrasion-resistant fabric for improved durability. The proofed goat leather is our most durable material. Outseams construction for the best comfort and perfect pole grip. Developed together with Swedish and Norwegian National Alpine Ski Teams. Outer Material: Proofed goat leather, HESTRA Flextron softshell 4-way stretch - Windproof, water-resistant and breathable. - 92% Polyamide, 8% Elastane. Insulation: Fiberfill - 100% Polyester Lining: Bemberg - 100% Polyester Details - Reinforced with d3o shock-absorption technology. - Pull strap with Velcro closure

Our most recent glove development for Alpine Racing features extensive protection in the areas of the hand that are the most exposed for impacts. The protection panels comprises two layers for improved protection: d3o material with intelligent molecules combined with harder panels of cell foam plastic. The d3o-material is soft and elastic until it receives an impact or vibration. Knuckles and underside of thumb are reinforced with abrasion-resistant fabric for improved durability. The proofed goat leather is our most durable material. Developed together with Swedish and Norwegian National Alpine Ski Teams. This mitten has a 5-finger lining. Outer Material: Impregnated goat leather - Water-resistant goat leather Insulation: Fiberfill - 100% Polyester Lining: Bemberg - 100% Polyester - 5-finger lining Details - Vertical cut - Reinforced with d3o shock-absorption technology.

A short, supple glove designed for slalom and developed together with the Swedish and Norwegian national alpine ski teams. Two layers of shock-absorbing material allow the gloves to better withstand impacts and distribute forces over a larger area. The knuckles and underside of the thumbs are reinforced with abrasion-resistant fabric for extra durability. Outer Material: Impregnated cowhide - Impact-absorbing material Insulation: Foam - Provides insulation and steadiness to the glove. Lining: Brushed polyester - Durable lining with a soft feeling. The brushed surface binds more air which provides a better insulation. 100% polyester. Details - Neoprene cuff - Pull strap with Velcro closure

Our warmest mitt made of durable, proofed Army Leather and flexible softshell material for really cold days. Comes with a removable 3-finger Primaloft liner. Outer Material: Army Goat Leather, Kangaroo leather reinforcement - Durable and proofed goat leather. HESTRA Flextron softshell 4-way stretch - Windproof, water-resistant and breathable. - 92% Polyamide, 8% Elastane. Insulation: Primaloft Gold - A soft, down-like insulation with breathable and warming properties. - 100% Polyester. Fiberfill - 100% Polyester Lining: Removable 3-finger lining Fiberfill - 100% polyester Details - Snow lock - Handcuffs - Carabiner - Elastic around the wrist - Pull strap with single grip buckle

The Resistance Layer Jersey is a flexible base layer with added protection against lacerations. Protective base layer - The Resistance Layer Jersey works as a protective base layer for skiers and snowboarders. By adding a new type of Dyneema with stretch developed specifically for POC, the base layer incorporates one of the world's strongest fibers to give laceration protection from sharp ski edges. The jersey is certified to European cut resistance standard EN388-2016, Level 3 (of 5). Wool for comfort - The base layer uses a wool/polyester blend in a double-knit construction so that the wool sits next to the body for extra comfort. Lycra lining around the neck enhances comfort, while a zipper increases practicality. - Base layer jersey with zones to protect from lacerations - Dyneema cut-resistant material in protective zones along legs - Passes EN388-2016, Level 3 European cut resistance standard - Double-knit wool/polyester blend where wool sits next to the body - Lycra neck lining for comfort - Zipper on neck opening Weight - 238g Composition - Main fabric: 73% polyester, 20% wool, 7% polyamide - Reinforcement: 95% Dyneema polyethylene 5% elastane

Keep young skiers protected from cuts from sharp ski edges with the Resistance Layer Tights, a flexible base layer with added laceration protection. Protective base layer - The Resistance Layer Tights JR work as a protective base layer for young skiers and snowboarders. By adding a new type of Dyneema with stretch developed specifically for POC, the base layer incorporates one of the world's strongest fibers to give laceration protection from sharp ski edges. The tights are certified to European cut resistance standard EN388-2016, Level 3 (of 5). Wool for comfort - The base layer uses a wool/polyester blend in a double-knit construction so that the wool sits next to the body for extra comfort. An elastic waistband ensures the base layer sits comfortably and securely in place for a whole day on the mountains. - Base layer tights with zones to protect from lacerations - Dyneema cut-resistant material in protective zones along legs - Passes EN388-2016, Level 3 European cut resistance standard - Double-knit wool/polyester blend where wool sits next to the body - Elastic waistband Weight - 148g Composition - Main fabric: 73% polyester, 20% wool, 7% polyamide - Reinforcement: 95% Dyneema polyethylene 5% elastane

Our most well-known ski racing glove has been improved yet again. The areas of the hand exposed to the greatest impacts are protected by a new material with intelligent molecules. The d3o-material is soft and elastic until it receives an impact or vibration. In general, the RSL Vertical Comp has the same functional, renowned design since Jonas Nilsson became World Champion with the first model in 1985. The glove is made of over one hundred individual pieces. External seams for the best comfort and perfect pole grip. The proofed goat leather is our most durable material. Outer Material: Impregnated goat leather - Water-resistant goat leather Insulation: Thermolite - Thin and supple polyester-based insulation. Thermolite retains its insulating properties even when wet. - 100% Polyester. Lining: Bemberg - 100% Polyester Details - Vertical cut - Reinforced with d3o shock absorption technology. - Leather pull strap with Velcro

The lightweight Men's Avant Featherless Insulated Hoody will keep you warm on your next outdoor adventure without feeling bulky or adding a lot of weight to your pack. 3M™ Thinsulate™ Recycled Featherless Insulation is made with 75% recycled loose-fill fibers that feel just as warm as 700 fill power down, but still perform when wet. The 20-denier, woven baffle fabric construction weaves the layers together, keeping the insulation in place and eliminating cold spots. Elastic binding around the hood will keep it firmly in place.

When it comes to onesies, there is only one. The famed Monsie means no gaps, except when you need one. Non-stop, head to toe 100% merino love. You won't want to take it off.

Perfect for layering, yet impressively warm on its own, the Deville down jacket is exactly what you're looking for in a versatile midlayer. The water resistant, stretch micro ripstop polyester material is designed to flex for unrestricted movement, and well placed insulation baffles maximize warmth in your core and arms while minimizing weight. The torso features Allied SILVER 650 fill down for warmth and compressibility, while the seams, arms, shoulders and hood boast LofTECH Summit™ synthetic for maximum durability, heat retention, and water resistance in your most exposed areas. It's a jacket your friends will be envious of, especially when you fold it into the internal neck pillow stuff sack and fall asleep on the way home from the mountain.

The Resistance Layer Jersey Jr gives younger skiers warmth and protection against lacerations. Protective base layer - The Resistance Layer Jersey JR works as a protective base layer for junior skiers and snowboarders. By adding a new type of Dyneema with stretch developed specifically for POC, the base layer incorporates one of the world's strongest fibers to give laceration protection from sharp ski edges. The jersey is certified to European cut resistance standard EN388-2016, Level 3 (of 5). Wool for comfort - The base layer uses a wool/polyester blend in a double-knit construction so that the wool sits next to the body for extra comfort. Lycra lining around the neck enhances comfort, while a zipper increases practicality. - Soft armor base layer with the cut resistance protection ski racers need - Passes EN388-2016, Level 4 European cut resistance standard - Constructed entirely from a new kind of Dyneema with stretch properties - Double-layer Dyneema in the zones that need most protection (main leg arteries) - Compression feel - Stretch - Elastic waistband Weight - 148g Composition - Main fabric: 73% polyester, 20% wool, 7% polyamide - Reinforcement: 95% Dyneema polyethylene 5% elastane

The Shins Comp is an ergonomic and padded shin guard. Constructed from carbon-fiber-reinforced TPE, and containing 10% PTFE, the durable, stiff and lightweight protectors are designed to minimize friction when hitting a gate, thereby enhancing a speedier passage through the gates. The protectors are lined with EVA padding for comfort and feature robust Velcro straps so they stay securely in place on every run. Cutting marks are included on the shield so that the length can be adjusted for a personal fit. - Length: 43cm

A durable competition glove for slalom and giant slalom. Supple with a perfect pole grip. Strong protection on the back of the hand guards against gates and impacts. This model has a 5-finger lining. Outer Material: Impregnated goat leather - Water-resistant goat leather Insert: No insert Insulation: Thermolite - Thin and supple polyester-based insulation. Thermolite retains its insulating properties even when wet. - 100% Polyester. Lining: Bemberg - 100% Polyester Details - Vertical cut - External seams - Vibration-absorbing intermediate layer of cellular rubber - Leather pull strap with Velcro - Pull strap with Velcro closure

Durable competition gloves for slalom and giant slalom. Supple with a perfect pole grip. Powerful protection on the back-of-the-hand guards against gates and impacts. Outer Material: Impregnated goat leather - Water-resistant goat leather Insert: No insert Insulation: Thermolite - Thin and supple polyester-based insulation. Thermolite retains its insulating properties even when wet. - 100% Polyester. Lining: Bemberg - 100% Polyester Details - Vertical cut - Leather pull strap with Velcro - Pull strap with Velcro closure - Outseams

Durable competition mitts for slalom and giant slalom. Supple with a perfect pole grip. Powerful protection on the back of the hand guards against gates and impacts. The glove comes with a 5-finger lining. Outer Material: Impregnated goat leather - Water-resistant goat leather Insulation: Thermolite - Thin and supple polyester-based insulation. Thermolite retains its insulating properties even when wet. - 100% Polyester. Lining: Bemberg - 100% Polyester - 5-finger lining Details - Vertical cut - External seams - Vibration-absorbing intermediate layer of cellular rubber - Leather pull strap with Velcro

A short and supple racing glove with Ergo Grip construction, for downhill racing and Super G. The Ergo Grip construction, with extra pre-curved fingers and minimal excess material in the palm gives the glove an excellent fit and a perfect ski pole grip. This glove is even more pre-curved than our other Ergo Grip gloves. Outer Material: Proofed cowhide Insulation: Foam - Provides insulation and steadiness to the glove. Lining: 100% Polyester Details - Neoprene cuff - Leather pull strap with Velcro

Short and close-fitting glove with GORE-TEX making it waterproof and breathable. Durable goat leather palm and softshell fabric on the back of the hand. Outseams construction in the palm for increased comfort and optimal grip. Outer Material: HESTRA Flextron softshell 4-way stretch - Windproof, water-resistant and breathable. - 92% Polyamide, 8% Elastane. Outer Material: Army Goat Leather - Durable and proofed goat leather. Insert: Waterproof - This glove has an insert (membrane) inside the glove, making the glove waterproof. Insulation: Thermolite - Thin and supple polyester-based insulation. Thermolite retains its insulating properties even when wet. - 100% Polyester. Insulation: Fiberfill - 100% Polyester Lining: Bemberg - 100% Polyester Details - Handcuffs - Carabiner - Neoprene cuff - Elastic pull strap with Velcro closure

One of our absolutely warmest mittens for those really cold days. Sewed from durable, proofed Army Leather and flexible softshell material. Removable liner with heavy G-loft insulation. Can be combined with other liners. Outer Material: Army Goat Leather - Durable and proofed goat leather. HESTRA Flextron softshell 4-way stretch - Windproof, water-resistant and breathable. - 92% Polyamide, 8% Elastane. Insulation: G-Loft - G-Loft is a very thin polyester fiber with exceptionally high insulating capacity, even in wet conditions. G-loft is quick drying, ventilated and very compressive. Lining: Bemberg - 100% Polyester Details - Handcuffs - Carabiner - Snow lock - Elastic around the wrist - Pull strap with single grip buckle

A long-cuffed and durable alpine ski glove for those who need a warm and dry glove, in really tough weather conditions, at a high activity level. Best in test in several ski magazines. This glove has a 5-finger lining. Outer Material: HESTRA Triton polyamide fabric - Windproof, water-resistant and breathable. - 100% polyamide. Army Goat Leather - Durable and proofed goat leather. Insert: GORE-TEX - A thin PTFE membrane that behaves in the same way as human skin. It breathes, i.e. it releases excess heat and body moisture, while preventing the penetration of any moisture from outside. A wind- and waterproof material. 38% polyamide, 62% ePTFE-GORE-TEX. Waterproof - This glove has an insert (membrane) inside the glove, making the glove waterproof. Insulation: Fiberfill - 100% Polyester Lining: Bemberg - 100% Polyester - 5-finger lining Details - Handcuffs - Carabiner - Snow lock - Eagle grip - Pull strap with Velcro closure

A long-cuffed and durable alpine ski glove for those who need a warm and dry glove, in really tough weather conditions, at a high activity level. Best in test in several ski magazines. Outer Material: Army Goat Leather - Durable and proofed goat leather. HESTRA Triton polyamide fabric - Windproof, water-resistant and breathable. - 100% polyamide. Insert: GORE-TEX - A thin PTFE membrane that behaves in the same way as human skin. It breathes, i.e. it releases excess heat and body moisture, while preventing the penetration of any moisture from outside. A wind- and waterproof material. - 38% polyamide, 62% ePTFE-GORE-TEX. Waterproof - This glove has an insert (membrane) inside the glove, making the glove waterproof. Insulation: Fiberfill - 100% Polyester Lining: Bemberg - 100% Polyester Details: Handcuffs - Eagle grip - Carabiner - Snow lock - Pull strap with Velcro closure

A long-cuffed and durable alpine ski glove for those who need a warm and dry glove, in really tough weather conditions, at a high activity level. Best in test in several ski magazines. Outer Material: HESTRA Triton polyamide fabric - Windproof, water-resistant and breathable. - 100% polyamide. Army Goat Leather - Durable and proofed goat leather. Insert: Waterproof - This glove has an insert (membrane) inside the glove, making the glove waterproof. GORE-TEX - A thin PTFE membrane that behaves in the same way as human skin. It breathes, i.e. it releases excess heat and body moisture, while preventing the penetration of any moisture from outside. A wind- and waterproof material. 38% polyamide, 62% ePTFE-GORE-TEX. Insulation: Fiberfill - 100% Polyester Lining: Bemberg - 100% Polyester Details - Handcuffs - Carabiner - Snow lock - Eagle grip - Pull strap with Velcro closure