Filter By:
Bottom Brackets
Dimension American bottom bracket for one-piece cranks.
- Include cups, bearings and cones
- 24 tpi
Bottom Brackets are an essential part of the bicycle that is often overlooked and forgotten, but we saw the BB as another opportunity for performance gains and improved efficiency. For our BB we have developed a seal that achieves a very low level of drag while still retaining excellent protection qualities. Its thinner and low viscosity bearing grease with the correct fill level offers higher durability at high speeds. If you're running the best crankset on the market, you should have the performance BB to match.
- Thinner and lower viscosity bearing grease for higher durability at high speeds
- In-house testing procedure includes developing a 24-hour continuous water invasion test
- Offered in a variety of types for better compatibility
- 386 EVO 46mm Press fit, 30mm Spindle, 103gm, 86.5mm
Bottom Brackets are an essential part of the bicycle that is often overlooked and forgotten, but we saw the BB as another opportunity for performance gains and improved efficiency. For our BB we have developed a seal that achieves a very low level of drag while still retaining excellent protection qualities. Its thinner and low viscosity bearing grease with the correct fill level offers higher durability at high speeds. If you’re running the best crankset on the market, you should have the performance BB to match.
- Thinner and lower viscosity bearing grease for higher durability at high speeds
- In-house testing procedure includes developing a 24-hour continuous water invasion test
- BB86 41mm Press fit, 30mm Spindle, 66gm, 86.5mm
FSA PowerPro JIS Cartridge Bottom Brackets.
- Includes bolts
- Spindle Interface Type: Square Taper JIS
- BB Shell Width (mm): 68
- BB/Frame Interface: English
- Enables the use of a MegaExo (24mm spindle) crankset on a BB90 (Trek Madone) frame
- Choose MegaExo carbon (ceramic bearings with red-anodized aluminum shields) or alloy (stainless steel bearings with black plastic shields)
Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame.
- Aluminum
- Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame
- Install with headset press (not included) and green Loctite (included)
The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces.
- Alloy cups
- Double "snap" seals for water and dirt protection
- Spindle Interface Type: Square Taper JIS
FSA (Full Speed Ahead) MegaExo 19 bottom brackets are for use with 19mm diameter spindles.
- Die cast and CNC-machined alloy bearing cups
- 19mm I.D.
- BB86/92 compatible
- BB Shell Width (mm): 92
- Bottom Bracket Shell I.D.: 41
Bottom brackets from FSA for non-threaded applications.
- 24mm spindle compatibility
- Stainless steel bearings
- Spindle Interface Type: FSA MegaExo
- BB Shell Width: 92mm
- Bottom Bracket Shell I.D.: 41
- BB/Frame Interface: BB92
- BBright Bottom Bracket to Mega Exo Carbon Crank BB-PF79 (EE086)
- Spindle Interface Type: FSA MegaExo, Shimano Hollowtech II
- BB Shell Width (mm): 79 – 84.5
- Bottom Bracket Shell I.D.: 46
- BB/Frame Interface: BBright Direct Fit
This FSA MegaExo bottom bracket is for use MTB MegaExo cranksets with 24mm spindles.
- Sealed bearings
- Die-cast then CNC machined alloy bearing cups
- Composite Di2-compatible adjustable center sleeve
FSA (Full Speed Ahead) MegaExo 19 bottom brackets are for use with 19mm diameter spindles.
- For Alloy Cranks with MegaExo 19 BB-AL86/19/SLE
- Spindle Interface Type: FSA MegaExo 19
- BB Shell Width: 86mm
- Bottom Bracket Shell I.D.: 41
- BB/Frame Interface: BB86
This FSA Bottom Bracket allows you to run MegaExo and other 24mm spindle cranksets with a BB86/BB89.5/BB92 frame.
- Intended for road use
- Steel bearings
There's precious little that's better than a fresh bottom bracket. This complete FSA BB30 Bottom Bracket contains 2 stainless steel bearings, 2 C-Clips, 2 dust covers, and 1 adjustment washer.
Bottom brackets from FSA for non-threaded applications.
- Spindle Interface Type: FSA MegaExo 19
- BB Shell Width (mm): 86
- Bottom Bracket Shell I.D.: 41
- BB/Frame Interface: BB86
- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension
- Mountain sets include bearings, shields, c-clips and spacer
- Choose ceramic or stainless steel options
ISIS revolutionized bottom bracket spindles. Keep yours spinning smoothly with this Platinum ISIS Bottom Bracket from FSA.
- Forged, hollow chromoly spindle with titanium nitride coating
- Integrated, large ball bearing design
- Cold-forged aluminum cups
- Includes crank bolts
Run your 386EVO crank with your frame that is designed for BB86 Shimano Pressfit bottom brackets with this FSA bottom bracket.
- 2 lines of bearings on each side
- Enables the use of a BB386EVO (30mm spindle) crankset on a 68mm English threaded frame
- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks
- BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks
- BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself)
- BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks
- BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks
- BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks
- BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks
- BB-4000 is for 19mm spindle 69mm shell Omega cranks
- BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks
- 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)
- Die Cast then CNC-machined alloy bearing cups
- Composite DI2 compatible adjustable center sleeve
- 100mm for Fat Bikes
- For use with 100mm MTB NBD MegaExo cranksets
- Spindle Interface Type: FSA MegaExo
- BB Shell Width (mm): 100
- Bottom Bracket Shell I.D.: 1.37
- BB/Frame Interface: English
- Enables the use of a MegaEVO (30mm spindle) crankset on a 68mm English threaded frame
- Compatible with Gravity Gradient MegaEVO 30mm cranks
- Spindle Interface Type: 386 EVO
- BB Shell Width: 68mm
- Bottom Bracket Shell I.D.: 46mm
- BB/Frame Interface: T47
- Weight: 95g
Stainless steel bearings for less friction and greater durability. Fits 89.5, 92, 104.5, 107 and 121mm bottom bracket widths. Designed to suit cranks with a 30mm axle in a Press Fit 41mm bottom bracket shell. **NOTE** 30mm PF41 bottom bracket does not use a threaded centre tube. Weight 77g.
KEY FEATURES
- External bottom bracket designed for threaded bottom brackets
- The machined aluminium cups hold stainless steel cartridge bearings in stainless races
- High quality stainless steel bearings give a much greater life span than stock units
- Cartridge bearings are replaceable
- Suitable for 68, 73, 83, 100 and 120mm width bottom brackets
- Options designed to suit 24mm or 30mm crank axles
- For 30mm models: Please note specific fitting tool (HTT188) needed to fit bottom bracket. Available separately
- Available with replaceable stainless bearings for less friction and greater durability
- Suitable for mtb, DH and fatbikes
- Free running labyryinth seal protects bearings and has less drag
- Weight 24mm: 110mm | 30mm: 102g
**Note - Some Power Meter cranks do not offer the clearance required over the BB cup, please ensure there is clearance before fitment.
High performing square bottom bracket interfaces with English frames.
- Fits square-taper spindle cranksets
- Alloy adjustable cups
- Includes 2 axle bolts
Designed to work flawlessly with your Patterson crank, this Metropolis bottom bracket delivers smooth performance and light weight.
The Problem Solvers Bushnell Eccentric Bottom Bracket is the industry leading design for chain tension adjustment on tandem and dedicated single speed bikes equipped with eccentric bottom bracket shells. The classic version features full-body, aluminum construction across the shell for maximum surface area friction and additional value.
The Bushnell Fat Bike Eccentric Bottom Bracket is designed for the 100mm shells in most fat bikes.
- Accepts English threaded bottom bracket cups
- Classic, full-body design
- Diameter of part - 2.118 inches (53.78mm)
- Fits BB shells from 53.8 ~ 54mm I.D. without shim
- Fits BB shells up to 100mm width
Race Face bottom bracket spacer kit for 124-130mm bottom brackets.